2.4 GHz Outdoor Bi-directional RF Amplifier
Designed for extending the range of 2.4 GHz wireless radio devices, this amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain.
The built-in dynamic power sensor in the amplifiers adjusts the radio frequency (RF) power output level by reading the input signal power. This auto gain adjustment delivers the maximum output power at various input levels while keeping the distortion at a minimum. Maximum RF output power of 0.5W.
Ideal to increase the range of low power devices like wireless LAN cards and low power radio modems.
Specifications
| Features | 250 mW | 500 mW | 1 Watt | 4 Watt |
| Operating Range | 2400 - 2500 MHz |
| Operating Mode | Bi-Directional TDD |
| Transmit Gain | 23 dB max | 27 dB max |
| Frequency Response | ± 1 dB |
| Output Power | 250 mW (+24 dBm) | 500 mW (+27 dBm) | 1 Watt (+ 30 dBm) | 4 Watt (+36 dBm) |
| TX Input Power | 1 mW (0 dBm) min 200 mW (+23dBm) max | 2mW
(3 dBm) min
200 mW
(23 dBm) max | 4mW
(5 dBm) min
200 mW
(23 dBm) max |
| Receiver Gain | 14 dB typical |
| Noise Figure | 3.5 dB typical |
| Connectors | N-Type (Female) 50 Ohm |
| Lightning Protection | Quarter Wave Technology |
| DC Surge Protection | Yes |
| Power Consumption | 600 mA @ 12 VDC | 600 mA @ 12 VDC | 1.0A @ 12 VDC | 3.4 A @ 12 VDC |
| Operating Temperature | -40 °C to + 70 °C |
* Transmit Gain is automatically adjusted
