PRODUCT SEARCH

PRODUCTS

NEWS

Sun, 23 Apr 17 01:45 pm EST    Languages: Español  Français  Português
Extranet Login | Site Map | Contact Us

Our Coordinates: Lat 42.75 N, Long 71.85 W  


Accessories (Installation Kits - Cables - Brackets)

Installation Kits

Access Bank I  Access BankII  Access Bank II/SDSL  Access Exchange

Speedway™ Installation Kit (for Access Bank or Access Exchange units)
Your installation is literally a snap. This Kit uses locking tabs and pins, versus screws, to install up to two Access Bank or Access Exchange units. Customer installation tests have shown up to a 75% reduction in installation time, as well as up to a 45% smaller footprint.

Cables

Access Bank I

TR-08 Conversion Cable 

TR-08 Conversion Cable for DS-0 to analog interface channel reassignment in reference to Bellcore TR-08 specifications for Mode I operation, providing the standard wiring sequence for Tip and Ring pairs. The cable is ten feet long with one 50-pin Amphenol female connector on the Access Bank I end, and one 50-pin Amphenol Telco connector on the punchdown block end. This cable is optional for TR-08 operation on the Access Bank I.

Access Bank II  

E&M Normal Cable 

4-Wire E&M Normal Mode cable for use with each 12 channel analog card. The cable is ten feet long with a 96-pin DIN female connector on the Access Bank II end, and two 50-pin Amphenol Telco connectors on the punchdown block end. Normal mode operation is typical for attachment to switching equipment, such as PBX systems. 

E&M Tandem Cable

4-Wire E&M Tandem Mode cable for use with each 12 channel analog card. The cable is ten feet long with a 96-pin DIN female connector on the Access Bank II end, and two 50-pin Amphenol Telco connectors on the punchdown block end. Tandem mode operation is typical for attachment to other transmission equipment, such as microwave or public 4-Wire E&M lines. Alternate names for Tandem operation are Reverse E&M or Pulse Link Repeater (PLR). 

E&M Transmission Only (TO) Cable 

Transmission Only (TO) Mode cable for use with each 12 channel analog card. The cable is ten feet long with a 96-pin DIN female connector on the Access Bank II end, and one 50-pin Amphenol Telco connector on the punchdown block end. TO mode operation is typical of dedicated "transmit only" operations, such as leased-line modems and radio equipment.

RS-232 Dual Cable 

Dual RS-232 User Data and Management Cable for connection to a router, computer, statistical multiplexer, SNA controller, SCADA equipment or other data equipment. The cable is ten feet long with one fine pitch D-Sub-26 male connector on the Access Bank II end, and two DCE DB-25 female connectors on the data equipment end. The Access Bank II supports both synchronous operation at 56 or 64Kbps, and asynchronous operation at 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4, and 57.6Kbps. The RS-232 User Data and Management Cable is required for RS-232 data operation on the Access Bank II.

Access Bank II & Access Exchange  

V.35 Male Cable 

V.35 Data Cable (male connector) for connecting a router (with female V.35 connector) or other data equipment to a T1 network using the Access Bank II's V.35 Data Port. The cable is ten feet long with one fine pitch D-Sub-26 male connector on the Access Bank II end, and one DCE V.35 Winchester male connector on the digital device end. The V.35 Data Cable is required for V.35data operation on the Access Bank II. 

V.35 Female Cable 

V.35 Data Cable (female connector) for connecting a router (with male V.35 connector) or other data equipment to a T1 network using the Access Bank II's V.35 Data Port. The cable is ten feet long with one fine pitch D-Sub-26 male connector on the Access Bank II end, and one DCE V.35 Winchester female connector on the digital device end. The V.35 Data Cable is required for V.35 data operation on the Access Bank II. 

Brackets

Please note: You must order a pair of heavy-duty Rack Brackets for each Access Bank product installed. For all vertical mounts, please order a pair of the respective Vertical Mount Brackets.

19" Rack Bracket Pair (P/N 710-0041)

Two(2) heavy-duty 19" rack mounting bracket allows installation in equipment racks and cabinets with variable front to back offset. This bracket can be used with the Access Bank family.

23" Rack Bracket Pair (P/N 710-0130)

Two(2) heavy-duty 23" rack mounting bracket allows installation in equipment racks and cabinets with variable front to back offset. This bracket can be used with the Access Bank family.

19" Vertical Mount Bracket Pair (P/N 710-0115)

Two (2) heavy-duty 19" horizontal cross bars for vertical installation in equipment racks and cabinets. This bracket can be used with the Access Bank family.

23" Vertical Mount Bracket Pair (P/N 710-0117)

Two (2) heavy-duty 23" horizontal cross bars for vertical installation in equipment racks and cabinets. This bracket can be used with the Access Bank family.

Wall Mount Bracket

Wall mounting bracket set (4 pieces) for wall mount installation. This bracket can be used with the Access Bank family included with each order.